gce 2022 intermediate level engineering drawing 2
gce 2022 intermediate level engineering drawing 2
THEME: CLAMPING DEVICE OF SPECIMEN FOR
UNIVERSAL TENSILE TEST MACHINES
I-SET-UP
The device represented on the drawing on Appendix 1 is a mechanism that permits the clamping of rubber or
fabrics in order to carry out a tensile test on it. The clamping device is composed of two parts:
– – The mobile jaw 4 that translates.
The fixed jaw 3_on which the specimen is clamped.
The mbber or fabrics is placed on the lower jaw. The undulating shape of the jaws is to prevent the tearing of the
tested material in the jaws.
II-DESCRIPTION ANDFUNCTIONING
The rotation of the operating screw 5 in the clockwise direction enables the translation of the mobile jaw 4
which clamps the specimen on the fixed jaw 3_by compressing the springs 7. During the unclamping phase, the
compressed springs maintain the contact between the mobile jaw 4and the end of the operating screw 5
I1I-WORKREQUIRED
SECTION A: Technological Study (20 marks)
Question 1: Identification and functioning of parts (5 marks)
1.1Give the name of piece 11
1.2 State the function of 11.
1.3 Give the names and references of two pieces involved in the translation process.
ii
( 1 mark)
(1 mark)
(3 marks)
Question 2: Knowledge of links (5 marks)
2.1 Indicate the nature of each of the links 2-5 and link 0-l_
2.2 State three characteristics for each of the links 2-5 and 0-1 by circling the correct answer in the table below
(3 marks)
Shadow walker
May 26, 2024
I almost slept when answering 😴😴😴😴