Ordinary level 2026 North west regional mock electrical and electronic technology 1

Ordinary level 2026 North west regional mock electrical and electronic technology 1

Ordinary level 2026 North west regional mock electrical and electronic technology 1

Here is the data extracted from the final image provided, which appears to be a multiple-choice section on automotive electrical systems and vehicle technology.


1. The expression “potential difference” is often used to express

  • A. current

  • B. resistance

  • C. voltage

  • D. electrons

2. Which of the following parts is rotated by the self-starter when starting a diesel engine?

  • A. Crankshaft

  • B. Flywheel

  • C. Camshaft

  • D. Vibration damper

3. In a 12V system, one amp is roughly the current required to light a

  • A. 1 watt bulb

  • B. 6-watt bulb

  • C. 12-watt bulb

  • D. 24-watt bulb

4. The role of a thermistor used in an alternator regulator is to

  • A. control maximum current

  • B. control maximum voltage

  • C. compensate for temperature change

  • D. control minimum current

5. When a battery is “taken off charge”, the terminal voltage is

  • A. 2.1 volts

  • B. 1.8 volt

  • C. less than 2.1 volts

  • D. less than 1.8 volt

6. In figure below, part 1 is

(The figure shows a simple lead-acid cell with $PbO_2$, $Pb$, and $2H_2SO_4$)

  • A. negative electrode

  • B. positive electrode

  • C. casing

  • D. electrolyte

7. The heat range of a spark plug can be determined by

  • A. the number of electrodes

  • B. its diameter

  • C. its length

  • D. its part number

8. The figure below shows a transistorised ignition with a hall effect type of pulse generator. What is the name given to the numbered part 1?

(The diagram shows a hall effect sensor assembly)

  • A. Vane

  • B. Magnet

  • C. Hall detector

  • D. Electronic amplifier

9. All of the following are the three major parts of a spark plug EXCEPT

  • A. Electrode gap, insulator, terminal

  • B. Insulator, electrodes, terminal nuts

  • C. Centre electrode, earth electrode, spark gap

  • D. Corrugation, top insulator, electrode

10. The device that uses engine power to produce electricity is known as

  • A. alternator drive belt

  • B. charging system harness

  • C. battery

  • D. alternator

11. Two types of windscreen wiper dives are

  • A. rack and pinion system

  • B. link and rack system

  • C. cam and peg system

  • D. link and blade system

12. The apparatus used for adjusting ignition timing is

  • A. accurate clock

  • B. tachometer

  • C. stop watch

  • D. stroboscopic light

13. When a car battery is half charged, the specific gravity of acid in this battery is usually

  • A. 0.74

  • B. 1.00

  • C. 1.12

  • D. 1.19

14. Centre housing that holds coils and shoes on the starting system is called

  • A. field frame

  • B. pinion assembly

  • C. armature

  • D. brush and frame

15. Anti-lock braking systems

  • A. decrease stopping distance in all conditions

  • B. assist the driver to retain control during emergency stops

  • C. are not used on heavy vehicles

  • D. are a form of re-generative braking system

16. The magnetic field required for starting a motor operation is provided by the

  • A. armature assembly

  • B. field-winding assembly

  • C. solenoid

PDF is loading please wait...


Leave a comment

Your email address will not be published. Required fields are marked *

JOIN OUR WHATSAPP GROUP! / REJOIGNEZ NOTRE GROUPE WHATSAPP!
sponsors Ads